Evaluate the number of links that need to be removed for a comfortable fit.
Step 2
Turn the watch band to expose the location of the screw pins, flange side out.
Step 3
Take a screwdriver to unscrew pins by rotating counter-clockwise.
Step 4
Once screw pins are loose, remove the pin. Repeat steps 3 & 4 as needed until the watch band is adjusted to the preferred length, removing any excess links.
Step 5
To reassemble or to add links, slide both sides of the band together to connect the links. Make sure to line the links up for the screw pins to be reattached.
Step 6
Insert the screw pin through the links. Then take the screwdriver to rotate clockwise and fasten the screw pin until it is secured in place.
